Avenview SW-HDM-4X1 Manual de usuario

www.linearcorp.com4X1 Switcher For 1.3Model # HDMI-SW-4X1USER MANUAL

6IR CODE CONFIGURATION4X1 Switcher For HDMI 1.3Remote Channel 1:DefaultRemote Channel 4:RemoteRemote Channel 1:Default1 2Remote Channel 2:1 2R

RS-232 SERIAL CONTROL INTERFACE7Binary TableASCII Input Binary1 1 0011 00012 2 0011 00103 3 0011 00114 4 0011 0100Terminal SettingsBits per second ...

WIRING DIAGRAM8Maximum HDMI cable length is 15 ft at 1080P resolution without the use of an HDMI-SB or HDMI-CAT5-EXT

SPECIFICATIONS9Video Amplier Bandwidth ...340 MHz Input Video Signal ...

WARRANTY10Note: These products are designed to be installed and serviced by trained professional installation companies.Linear LLC warrants this prod

HDMI-SW-4X1(760) 438-7000(800) 421-1587 FAX (800) 468-1340www.linearcorp.comRev A

ASKING FOR ASSISTANCETechnical Support:Telephone (800) 421-1587 (760) 438-7000Fax (760) 438-7199 Technical Support Hours:6:30 AM - 4:30

TABLE OF CONTENTS12345678910Introduction / Operation NotesFeaturesPanel DescriptionsConnecting and Operating the 4X1 Switcher For HDMI 1.3RMT4-IR Inst

The Linear 4x1 Switcher for HDMI 1.3 routes high denition video in multiple resolutions up to 1080p plus multichannel digital audio from any of four

FEATURES2FeaturesSwitches easily between any four HDMI sources• Supports resolutions up to 1080p, 2K and 1920 x 1200 • Inputs can be switched with the

3PANEL DESCRIPTIONSIR Eye Input LED IndicatorFRONTBACKDIP SWITCH LOCATIONInput 1SelectorInput 2SelectorInput 3SelectorInput 4SelectorPower LED Indicat

CONNECTING AND OPERATING THE 4X1 SWITCHER FOR HDMI 1.3SWITCHING INPUTS ON THE 4X1 SWITCHER FOR HDMI 1.3How to Connect the 4X1 Switcher For HDMI 1.3 to

RMT-4IR INSTALLATION1. Remove battery cover from the back of the RMT-4IR remote.2. Verify that dip switches 1 & 2 are in the down (OFF) position.