Avenview RTERM Series Guía de usuario descargar pdf (Pagina 8)

www.avenview.com

d. Connect the Cable: Plug one end of the cable to DVI-C5-LC-R Receiver’s RJ45 “SYSTEM LINK”

port. The Receivers connected monitor should display now and the green LED above

DVI-C5-LC-R’s RJ45 port should turn ON to reflect the DVI signal activation. For DVI-C5-LC-R,

you can manually adjust the EQ/FOCUS to have the best DVI display. The display DVI

resolution will also relate to the distance been extended. It will be better to test prior to

actual installation and should not exceed the suggested frequency and corresponding

distance.

Installation Diagram of DVI-C5-LC-R

Multi-Port DVI-C5-2/4/8 Splitter / Extender Installation

a. First Time Setup: Turn off the DVI output device (PC or DVD Player) and monitors.

b. Connection: Connect local DVI monitor and speaker to the “VIDEO/AUDIO OUT” of the

transmitter and take one DVI integrated cable DVI-C5-180AT), plug DVI end to

“VIDEO/AUDIO IN” port of transmitter and the other end of the cable to PC’s DVI-D video

and speaker ports.

c. Connect power adapter.

d. Turn ON your DVI output device and monitor to confirm the function of display. The “LINK”

LED of the transmitter should turn Orange to indicate the connection of a local DVI monitor

and the “ACTIVE” LED should turn Blue to indicate an activated DVI-D signal.

e. The transmitter has built in an EDID simulator, when you connect local DVI monitor, the

transmitter will automatically record the EDID from DVI monitor. When you not connecting

DVI monitor locally, the transmitter will simulate the EDID communication like a regular

monitor and activate the DVI signal of PC.

1 2 3 4 5 6 7 8 9 10 11 12

Sin comentarios

Avenview RTERM Series Guía de usuario Pagina 8